Texture Cure Machine

Concrete Texture Cure Equipment

The WB-3200 Texture Cure Machines allows for simultaneous texture and curing operations. Compact design allows working height as low as 18″ from grade height. Adaptive frame design allows for any attachments to be mounted on either side. The tethered electronic control console is mounted the same way as the operator seat, allowing a quick reverse changing feature to allow operator to be on the left or right side. A quick selection in the control system allows for all controls to be reversed, with no electrical or hydraulic connections needing to be removed.

Standard Equipment

  • 25 hp Caterpillar 1.1 Diesel
  • Forward and Reverse Steering Sensors
  • 4 Elevation Sensors
  • Danfoss Pressure Compensated Pump
  • Plus +1 Control System
  • Onboard Diagnostics
  • Minimum 12′ Paving Width


  • Front or Rear Walkways
  • Frame Extensions to 32′
  • Burlap Drag System
  • Cure Spray System
  • Longitudinal Tining Rack
  • Transverse Tining Rack
  • Custom Design Options Available

Design Features

  • Main Frame:
    24″ high
    48″ telescoping frame slide
  • Frame Extensions:
    18″ high
    42″ wide
  • Rubber Tracks:
    75″ long
    11.5″ wide
    Compact track motor/drive
    Four corner 18″ stroke elevation cylinders

Have a question on Texture Cure Machines?

Contact our Expert Sales Team at 815-385-7700
or complete the following form

  • This field is for validation purposes and should be left unchanged.